
Aidalarm S1708A Aidalarm Press to Reset Button with Braille text
Aidalarm S1708A Aidalarm Press to Reset Button with Braille text. A wall mounting Press to Reset button with Braille text plus 2 high brightness yellow LEDs and sounder for caller reassurance. Enclosed in white ABS plastic, complete with a single gang surface mounting box. Flush fitting is also possible with a standard single gang back box. This is a non-latching unit with N.O. contacts specifically designed for use with our Aidalarm Disabled Toilet Alarm systems. The LEDs and sounder have separate terminals. The LED and sounder current limit resistor is provided for 12 vdc operation. The button contacts are rated at 50ma 24vdc resistive, N.O. press to close.
They should NOT be used for switch feeds to door strikes or mag locks etc.
Aidalarm – Wireless Disabled Toilet Alarm Kit A600WKITM( Control Panel should be Main Powered 230V )
Aidalarm – Wireless Disabled Toilet Alarm Kit A600WKITM, A600WKITB, A600WKIT12
Aidalarm A600B Aidalarm Disabled toilet alarm controller – battery powered
Aidalarm A600B Aidalarm Disabled toilet alarm controller - battery powered. Aidalarm A600B battery powered controller meets the requirements for emergency signalling systems for disabled persons and is fully compliant with BS8300 and the requirements of the Disability Discrimination Act. The A600B is ideal for installation by any competent handyman and does not cause any installation conflicts with the Part P Building Regulations.
This unit is compatable with Hoyles Call Equipment Range. The unit requires either a S1600-R or S1600AL-R ceiling mounted RED pull cord, (optional) Dado panic strip RPD01000 or wall mounted call button S1705PY. Additionally, a S1708A reset button must be fitted to enable the system to be reset at or near the point of calling. An S1778A overdoor light /sounder can be added to give warning in the immediate area.
Aidalarm A600L Aidalarm Disabled toilet alarm controller – mains powered
Aidalarm A600L Aidalarm Disabled toilet alarm controller - mains powered. Aidalarm meets the requirements for emergency signalling systems for disabled persons and is fully compliant with BS8300 and the requirements of the Disability Discrimination Act.
The A600L is a 240VAC mains powered controller, this unit can also be powered by 12vdc requiring a minimum of 250mA.
This unit is compatable with Hoyles Call Equipment Range. The unit requires either a S1600-R or S1600AL-R ceiling mounted RED pull cord, (optional) Dado panic strip RPD01000 or wall mounted call button S1705PY. Additionally, a S1708A reset button must be fitted to enable the system to be reset at or near the point of calling. An S1778A overdoor light /sounder can be added to give warning in the immediate area.
Aidalarm A600lkitb Aidalarm Battery Powered Disabled Toilet Alarm Kit
Aidalarm A600lkitb Aidalarm Battery Powered Disabled Toilet Alarm Kit. This battery powered kit meets the requirements for emergency signalling systems for disabled persons and is fully compliant with BS8300 and the Disability Discrimination Act. Everything is provided in the kit (except cable and fixings) to deliver an effective, fully compliant, simple to install and simple to use system.
Could also be used as a emergency assistance alarm in changing rooms, interview rooms, reception areas etc.
Aidalarm A600lkitm Aidalarm Mains Powered Disabled Toilet Alarm Kit
Aidalarm A600lkitm Aidalarm Mains Powered Disabled Toilet Alarm Kit. This mains powered kit meets the requirements for emergency signalling systems for disabled persons and is fully compliant with BS8300 and the requirements of the Disability Discrimination Act. Everything is provided in the kit (except cable and fixings) to deliver an effective, fully compliant, simple to install and simple to use system.
Could also be used as a emergency assistance alarm in changing rooms, interview rooms, reception areas etc.
Can be powered by 12vdc requires a minimum of 250mA
Aidalarm A600lkitmd Aidalarm Disabled Toilet Alarm Kit with Panic Strip
Aidalarm A600lkitmd Aidalarm Disabled Toilet Alarm Kit with Panic Strip. This mains powered kit meets the requirements for emergency signalling systems for disabled persons and is fully compliant with BS8300 and the requirements of the Disability Discrimination Act. Everything is provided in the kit (except cable and fixings) to deliver an effective, fully compliant, simple to install and simple to use system.
Could also be used as a emergency assistance alarm in changing rooms, interview rooms, reception areas etc.
Can be powered by 12vdc requires a minimum of 250mA
c
Hoyles S1778BR Polished Brass Red Overdoor Light and sounder. Polished Brass flush fitting overdoor light and sounder with16mm Red Jumbo LED. There are separate terminals provided for the LED.
The LED and sounder current limit resistor is provided for 12 vdc operation.
Exitguard Fire Door Alarm with integral keyswitch – Red
Exitguard Fire Door Alarm with integral keyswitch - Red. The Hoyles Exitguard is designed to deter and stop the misuse of emergency exit doors. This emergency exit door alarm is the ideal solution for the security of your fire exit doors. An integral high-power 105dB sounder is activated when the door is opened to warn those in the vicinity that security of the door has been compromised.
The Exitguard fire door alarm can be supplied in battery, 12vdc and mains powered versions. The tamper feature includes sounder reduction via the keyswitch and is configured in such a way that the alarm can be set even if tamper security has been breached.
See a full list of fire exit door alarm system features below:
Hoyles 32 Tone Sounder Strobe 9-30vdc with deep base
Hoyles 32 Tone Sounder Strobe 9-30vdc with deep base. Part numbers:
958CHX1001 - Red lens with deep red base
958CHX1501 - Red lens with deep white base
958CHX1701 - Amber lens with deep white base
958CHX1801 - Blue lens with deep white base
958CHX1901 - Green lens with deep white base
Hoyles 8 way Indicator unit with sounder
Hoyles 8 way Indicator unit with sounder. A wall mounted 8 way Indicator unit with sounder in white ABS complete with a single gang low profile mounting box and a scratch resistant decal. There are separate drive inputs for both the individual lights and the sounder. The LEDs are available in RED, GREEN or YELLOW.
The LED and sounder limit resistor is provided for operation at 12vdc.
We will label the facia with words of your choice or supply it blank. Please see Technical Info tab for "Text Requirements" download sheet.
Hoyles Boxed Dual Double Pole Relay Module
Hoyles Boxed Dual Double Pole Relay Module. Two completely separate double pole change over relays on a single PCB mounted in a standard white plastic single gang enclosure complete with front and back acting tamper switch.
Hoyles Boxed Mains Rated Relay Module
Hoyles Boxed Mains Rated Relay Module. A double pole change over (DPCO) relay with 5A 250vac mains rated contacts. Supplied in a plastic single gang sized enclosure complete with tamper switch. Ideal for switching a mains lighting circuit from an intruder alarm.
Hoyles Boxed Multi Function Timer Relay
Hoyles Boxed Multi Function Timer Relay. Mounted in a standard white plastic single gang enclosure complete with front and back acting tamper switch. A unique labelling system allows for the onsite labelling of the enclosure. Universal timer module with two timing ranges 1 - 60 sec's & 1 - 60 mins. Volt free DPCO relay contacts are rated at 1A/30vdc resistive. Multiple trip modes. A-stable operation for pulsing sounders etc. This versatile unit can also be used as a commutating relay i.e. one pulse energises the relay and a further pulse de-energises the relay.
Hoyles Boxed Quad Double Pole Relay Module
Hoyles Boxed Quad Double Pole Relay Module. Four completely separate double pole change over relays on a single PCB mounted in a standard white plastic single gang enclosure complete with front and back acting tamper switch.
Hoyles Boxed Tri Double Pole Relay Module
Hoyles Boxed Tri Double Pole Relay Module. Three completely separate double pole change over relays on a single PCB mounted in a standard white plastic single gang enclosure complete with front and back acting tamper switch.
Hoyles Call Button with reassurance LEDs and Sounder
Hoyles Call Button with reassurance LEDs and Sounder. A wall mounted Call button in white ABS complete with a single gang mounting box. This is a non-latching unit with N/O contacts. The LEDs (available in RED, BLUE, GREEN or YELLOW) and sounder have separate terminals for acknowledge purposes.
The LED and sounder current limit resistor is provided for 12 vdc operation. The button contacts are rated at 50mA @ 12vdc. N/O press to close.
They should NOT be used for switch feeds to door strikes or mag locks etc.
Hoyles Double Pole Relay Module
Hoyles Double Pole Relay Module. A simple double pole change over relay module.
Hoyles Double Pole Relay Module 5A contacts
Hoyles Double Pole Relay Module 5A contacts. A double pole change over (DPCO) relay mounted on a PCB
Hoyles Dual Double Pole Relay Module
Hoyles Dual Double Pole Relay Module. Two completely separate double pole change over relays on a single PCB.