Showing 1–20 of 40 results

Show sidebar
Hoyles Multi function push button c/w LEDs sounder & custom text
Close

Hoyles Multi function push button c/w LEDs sounder & custom text

AED 378.00
Hoyles Multi function push button c/w LEDs sounder & custom text. Wall mounted button in white ABS complete with a single gang low profile mounting box. This is a MULTI-FUNCTION button that provides DPCO contacts rated at 2A 30vdc for use with equipment such as maglocks and door strikes. The function of the button can be changed. (Momentary, Latching, Delayed latch and Commutate) Two LEDs and an integral sounder are provided. The LEDs indicate when relay is switched, the sounder bleeps as relay changes. The LEDs are available in RED, BLUE, GREEN or YELLOW. This product requires a continuous supply of 12vdc.
Hoyles ACP100G Alarmed Emergency Release Resettable call point
Close

Hoyles ACP100G Alarmed Emergency Release Resettable call point

AED 835.80
Hoyles ACP100G Alarmed Emergency Release Resettable call point. Alarmed Emergency release call point with integrated alarm provides a deterrent against the misuse of Emergency Releases, ideal for vulnerable Emergency doors. Operation Emergency Release disconnects power to electronic locks, at the same time the 105dB sounder activates and an LED flashes to alert staff that the Emergency Release has been activated. The sounder can be silenced using the incorporated keyswitch. Even when keyswitch is isolated the sounder will bleep every 30 seconds to warn Emergency Release has not been reset. The system will only fully silence once the call point has been reset and the keyswitch returned to the armed position. The Emergency Release also incorporates a simple cover to prevent accidental operation.
Placeholder
Close

Hoyles Clearwave Hygienic,Touch Free Automatic Door Activation Switch

AED 680.40
Hoyles Clearwave Hygienic,Touch Free Automatic Door Activation Switch. Non-Touch microwave technology door activation switch designed for installations where hygiene is of paramount importance such as Cleanrooms, food processing and chemical industry applications. The Clearwave has an adjustable touchless detection ranges from 5-40cm. The water resistant foam gasket protects the switch from water damage, there is no requirement for a back box, the Clearwave is completely flush mounted for zero wall damage.
Placeholder
Close

Hoyles Clearwave Hygienic,Touch Free Automatic Door Activation Switch

AED 680.40
Hoyles Clearwave Hygienic,Touch Free Automatic Door Activation Switch. Non-Touch microwave technology door activation switch designed for installations where hygiene is of paramount importance such as Cleanrooms, food processing and chemical industry applications. The Clearwave has an adjustable touchless detection ranges from 5-40cm. The water resistant foam gasket protects the switch from water damage, there is no requirement for a back box, the Clearwave is completely flush mounted for zero wall damage.
Hoyles CM-41-1-smle Push Pad round, supplied plain or can be Laser Etched
Close

Hoyles CM-41-1-smle Push Pad round, supplied plain or can be Laser Etched

AED 840.00
Hoyles CM-41-1-smle Push Pad round, supplied plain or can be Laser Etched. Supplied plain or can be Laser Etched with TEXT of your choice. Please advise text when ordering.
Hoyles eblppo2 Flush Push Pad, pre-printed Disabled logo and Push To Open
Close

Hoyles eblppo2 Flush Push Pad, pre-printed Disabled logo and Push To Open

AED 491.40
Hoyles eblppo2 Flush Push Pad, pre-printed Disabled logo and Push To Open. Flush mounted Push Pad pre-printed with Disabled logo and Push To Open. This push pad can be surface mounted using either the SSBB03 Stainless Steel Box or the PBB03-BK Black Plastic Box. Constructed from stainless steel, this model incorporates a large actuating area which is easily identifiable to the user.
Placeholder
Close

Hoyles J-Wave Touchless Door Activation Switch

AED 737.10
Hoyles J-Wave Touchless Door Activation Switch. The architrave style, low profile design facilitates a tidy installation on door frames or guiderails. J-Wave's touchless design reduces the spread of germs and improves accessibility in healthcare, retail and commercial settings. With a detection distance of up to 30cm and an ability to detect very fast hand movements in front of the switch body. J-Wave is made from a tough, polycarbonate material with a constantly illuminated LED so that the J-Wave can be easily located in dimly lit environments.
Hoyles LAB35084 Emergency Escape Only sign 300 x 90mm
Close

Hoyles LAB35084 Emergency Escape Only sign 300 x 90mm

AED 45.15
Hoyles LAB35084 Emergency Escape Only sign 300 x 90mm.
Hoyles pbb03-bk Black large plastic back box
Close

Hoyles pbb03-bk Black large plastic back box

AED 115.50
Hoyles pbb03-bk Black large plastic back box. Used to surface mount the EBLPP02 push pad
Hoyles S1705BR Polished Brass Call button with re-assurance LED
Close

Hoyles S1705BR Polished Brass Call button with re-assurance LED

AED 748.65
Hoyles S1705BR Polished Brass Call button with re-assurance LED. Polished Brass engraved call point with a vandal resistant button and re-assurance LED. This is a non-latching unit with change over contacts. Separate terminals are provided for the LED (red). The LED current limit resistor is provided for 12 vdc operation.
Hoyles S1705S Call button with re-assurance LED Stainless steel
Close

Hoyles S1705S Call button with re-assurance LED Stainless steel

AED 687.75
Hoyles S1705S Call button with re-assurance LED Stainless steel. Flush fitting stainless steel engraved call point with a vandal resistant button and re-assurance LED. This is a non-latching unit with single pole change over contacts. Separate terminals are provided for the LED (red). The LED current limit resistor is provided for 12 vdc operation.
Hoyles S1705S-ATS Call button with LED c/w anti tamper screws stainless steel
Close

Hoyles S1705S-ATS Call button with LED c/w anti tamper screws stainless steel

AED 774.90
Hoyles S1705S-ATS Call button with LED c/w anti tamper screws stainless steel. Stainless steel engraved call point with a vandal resistant button and re-assurance LED. This is a non-latching unit with change over contacts. Separate terminals are provided for the LED (red). The LED current limit resistor is provided for 12 vdc operation. This item is supplied complete with 2 x pin-hex anti tamper screws.
Hoyles S1705STC Button & LED with special text Stainless steel
Close

Hoyles S1705STC Button & LED with special text Stainless steel

AED 746.55
Hoyles S1705STC Button & LED with special text Stainless steel. Flush fitting stainless steel button with re-assurance LED. Similar to the S1705S. This version supplied with text of your choice engraved. Specify text required when ordering, 45 characters maximum Please Note: Lead time for this item is 7-10 working days with special text
Hoyles S1706PG Multi function Press to Exit button c/w green LED & sounder
Close

Hoyles S1706PG Multi function Press to Exit button c/w green LED & sounder

AED 378.00
Hoyles S1706PG Multi function Press to Exit button c/w green LED & sounder. A wall mounted button in white ABS complete with a single gang low profile mounting box. This is a MULTI-FUNCTION button that provides DPCO contacts rated at 1A 30vdc for use with equipment such as maglocks and door strikes. The function of the button can be changed. (Momentary, Latching, Delayed latch and Commutate) Two LEDs and an integral sounder are provided. The LEDs indicate when relay is switched, the sounder bleeps as relay changes. This product requires a continuous supply of 12vdc.
Hoyles S1706S Press to Exit button Stainless steel
Close

Hoyles S1706S Press to Exit button Stainless steel

AED 518.70
Hoyles S1706S Press to Exit button Stainless steel. Flush fitting stainless steel call point with a vandal resistant button, engraved Press to Exit . This is a single pole non-latching unit with change over contacts. Suitable for use with access control and door interlock systems etc.
Hoyles S1706S Press to Exit button Stainless steel
Close

Hoyles S1706S Press to Exit button Stainless steel

AED 518.70
Hoyles S1706S Press to Exit button Stainless steel. Flush fitting stainless steel call point with a vandal resistant button, engraved Press to Exit . This is a single pole non-latching unit with change over contacts. Suitable for use with access control and door interlock systems etc.
Hoyles S1706STC Button with special text Stainless steel
Close

Hoyles S1706STC Button with special text Stainless steel

AED 577.50
Hoyles S1706STC Button with special text Stainless steel. Flush fitting engraved stainless steel button.This version supplied with text of your choice engraved. Specify text required when ordering, 45 characters maximum Please Note: Lead time for this item is 7-10 working days
Hoyles S1706STC Button with special text Stainless steel
Close

Hoyles S1706STC Button with special text Stainless steel

AED 577.50
Hoyles S1706STC Button with special text Stainless steel. Flush fitting engraved stainless steel button.This version supplied with text of your choice engraved. Specify text required when ordering, 45 characters maximum Please Note: Lead time for this item is 7-10 working days
Hoyles S1707PG Multi function Press to Enter button c/w green LED & sounder
Close

Hoyles S1707PG Multi function Press to Enter button c/w green LED & sounder

AED 378.00
Hoyles S1707PG Multi function Press to Enter button c/w green LED & sounder. A wall mounted ENTER button in white ABS complete with a single gang mounting box. This is a MULTI-FUNCTION button that provides DPCO contacts rated at 1A 30vdc for use with maglocks and door strikes. The function of the button can be changed. (Momentary, Latching, Delayed latch and Comutate) Two green LEDs and an integral sounder are provided . This product requires a continuous supply of 12vdc.
Hoyles S1707S Press to Enter button Stainless steel
Close

Hoyles S1707S Press to Enter button Stainless steel

AED 518.70
Hoyles S1707S Press to Enter button Stainless steel. Flush Fitting stainless steel Press to Enter push button with vandal resistant button. This is a single pole non-latching unit with change over contacts. Suitable for use with access control systems etc.