Hoyles 858MM08728 Wall mounting bracket for deep base sounder strobe
Hoyles 858MM08728 Wall mounting bracket for deep base sounder strobe. Use bracket instead of drilling deep base to prevent IP66 rating being compromised.
Hoyles BA87330/01 Shallow base in white for use with sounder beacons
Hoyles BA87330/01 Shallow base in white for use with sounder beacons. Shallow base for use with 32 Tone Sounder / Strobe.
If used to convert deep base sounder beacons to shallow base, the IP rating changes to IP45.
Hoyles BA87340/01 Shallow base in red for use with sounder beacons or strobe
Hoyles BA87340/01 Shallow base in red for use with sounder beacons or strobe. Shallow base for use with 32 Tone Sounder / Strobe.
If used to convert deep base sounder beacons to shallow base, the IP rating changes to IP45.
Hoyles 32 Tone Sounder Strobe 9-30vdc with deep base
Hoyles 32 Tone Sounder Strobe 9-30vdc with deep base. Part numbers:
958CHX1001 - Red lens with deep red base
958CHX1501 - Red lens with deep white base
958CHX1701 - Amber lens with deep white base
958CHX1801 - Blue lens with deep white base
958CHX1901 - Green lens with deep white base
Hoyles S451-B False Alarm Filter Boxed Intruder Alarm
Hoyles S451-B False alarm filter boxed. The S451 is an interface relay that sits between a detector and an intruder alarm control panel to filter off occasional trips caused by the environment such as wildlife, and provide a momentary output when the alarm criteria are met. eg. 3 trips in a 30 second window.
The S451 can monitor either a normally closed, (open to alarm), or normally open, (close to alarm), contact. The momentary output is fixed at 2 seconds so it can be detected by most alarm equipment. As the S451 doesn't latch, it never requires resetting.
Hoyles S451 False alarm filter module
Hoyles S451 False alarm filter module. The S451 is an interface relay that sits between a detector and an intruder alarm control panel to filter off occasional trips caused by the environment such as wildlife, and provide a momentary output when the alarm criteria are met. eg. 3 trips in a 30 second window.
The S451 can monitor either a normally closed, (open to alarm), or normally open, (close to alarm), contact. The momentary output is fixed at 2 seconds so it can be detected by most alarm equipment. As the S451 doesn't latch, it never requires resetting.
Hoyles VQ16297 Boxed 10A Mains Rated Relay IP65 rated enclosure
Hoyles VQ16297 Boxed 10A Mains Rated Relay IP65 rated enclosure. Used for switching larger loads. Ideal to provide higher rated mains contacts from our S361-MB 12vdc operated mains relay.
Hoyles Mains rated relay kit
Hoyles Mains rated relay kit. This kit is designed for switching a 240vac mains load of up to 5A operated by a 12vdc or 24vdc input from an intruder for fire alarm system depending on version. The relay coil is rated at 35mA. Two white plastic single gang enclosures are provided for segregation of the alarm system and the mains connections.
The first enclosure is tampered and contains a relay with single pole change over contacts rated 5A at 240vac or 12/24vdc. The relay coil requires 12vdc or 24vdc, depending on version, to operate. An LED is also provided which illuminates when the relay is energised. The tamper switch is normally closed and opens when the face plate is removed from the wall.
The second enclosure is purely a junction box which provides a replication of the SPCO contacts. An earth terminal is also provided for convenient termination of an in coming mains cable. As the enclosures are all plastic, no earth connection is required. A loop of cable is provided within the kit to connect the two enclosures together.
Hoyles Boxed Mains Rated Relay Module
Hoyles Boxed Mains Rated Relay Module. A double pole change over (DPCO) relay with 5A 250vac mains rated contacts. Supplied in a plastic single gang sized enclosure complete with tamper switch. Ideal for switching a mains lighting circuit from an intruder alarm.
Hoyles Double Pole Relay Module 5A contacts
Hoyles Double Pole Relay Module 5A contacts. A double pole change over (DPCO) relay mounted on a PCB
Hoyles Boxed Quad Double Pole Relay Module
Hoyles Boxed Quad Double Pole Relay Module. Four completely separate double pole change over relays on a single PCB mounted in a standard white plastic single gang enclosure complete with front and back acting tamper switch.
Hoyles Boxed Tri Double Pole Relay Module
Hoyles Boxed Tri Double Pole Relay Module. Three completely separate double pole change over relays on a single PCB mounted in a standard white plastic single gang enclosure complete with front and back acting tamper switch.
Hoyles Boxed Dual Double Pole Relay Module
Hoyles Boxed Dual Double Pole Relay Module. Two completely separate double pole change over relays on a single PCB mounted in a standard white plastic single gang enclosure complete with front and back acting tamper switch.
Hoyles Quad Double Pole Relay Module
Hoyles Quad Double Pole Relay Module. Four completely separate double pole change over relays on a single PCB.
Hoyles Triple Double Pole Relay Module
Hoyles Triple Double Pole Relay Module. Three completely separate double pole change over relays on a single PCB.
Hoyles Dual Double Pole Relay Module
Hoyles Dual Double Pole Relay Module. Two completely separate double pole change over relays on a single PCB.
Hoyles Panel of 20 Double Pole Relay Modules
Hoyles Panel of 20 Double Pole Relay Modules. A panel of 20 of our double pole change over relay modules. Ideal for van stock, individual modules can be snapped off the panel as required. A discounted price compared to buying 20 separate modules.
Hoyles Double Pole Relay Module
Hoyles Double Pole Relay Module. A simple double pole change over relay module.
Hoyles S351-B-PSU S351 relay module in a steel enclosure with a 2A 12vdc PSU
Hoyles S351-B-PSU S351 relay module in a steel enclosure with a 2A 12vdc PSU. Universal timer module with two timing ranges 1 - 60 sec's & 1 - 60 mins. Volt free DPCO relay contacts are rated at 1A/30vdc resistive. Multiple trip modes. A-stable operation for pulsing sounders etc. This versatile unit can also be used as a commutating relay ie one pulse energises the relay and a further pulse de-energises the relay.
Hoyles S312T-B-PSU S312T relay module in a steel enclosure with a 2A 12vdc PSU
Hoyles S312T-B-PSU S312T relay module in a steel enclosure with a 2A 12vdc PSU. Interface relay . This device accepts a variety of input conditions (Voltage, Logic, Closed Circuit and Open Circuit) for interfacing various signals via voltage free DPCO contacts.
The S312T-B-PSU is similar to the S312N-B-PSU but its action can be delayed by between about 3 and 60 seconds. This can be adjusted with the on board potentiometer. This can be a useful feature where it is necessary to delay one action slightly to allow another.