Your list is empty, add products to the list to send a request
Close
12FIT131 Fiamm Battery
12FIT131 Fiamm Battery 12v 130ah
Close
12FLB350P Fiamm Battery
12FLB350P Fiamm Battery 12V, 90Ah @ 20hr rate Dimensions: 302 (L) x 174 (w) x 218 (h)
Close
12V 10Amps power supply unit for Analog cctv system
12V 10Amps power supply unit for Analog cctv system
Close
12V 2A DC Power Supply Adapter for CCTV Camera
12V 2A DC Power Supply Adapter for CCTV Camera
Close
12v 30amps Power supply Unit for Analog Cameras
12v 30amps Power supply Unit for Analog Cameras
Close
3M UTP Cable Cat 6 3M-305 MTR BOX
3M UTP CABLE Cat 6 3M-305 Mtr Box Belonging to the 3M Volition Network Solutions, this 350 MHz UTP Category 6 cable will deliver the best performance when used with the 3MTM RJ45 K6 jacks, to give highest margins over Category 6 / TIA/EIA 568 and ISO 11801 and EN 50173 Class E standards.Length markings on the cable sheath.
Close
4.5 Litre Portable Ultra Low Volume Fogger/Disinfection Sprayer
4.5 Litre Portable Ultra Low Volume Fogger/Disinfection Sprayer
Close
6U cabinet 600×450
6U cabinet 600×450
Close
6U Cabinet with Fan, Glass Door, PDU
6U Cabinet with Fan, Glass Door, PDU
Close
7Nos of Analog Camera Fixing Only
7 Nos of Analog Camera Fixing Only
Close
ACM-EMI-S Proximity ISO Blank Card
ACM-EMI-S Proximity ISO Blank Card Contactless smart card, in which the card communicates with and is powered by the reader
Close
AICO Cat 6 UTP 23AWG Network Cable Black 1 meter
AICO Cat 6 UTP 23AWG Network Cable Black 1 meter
Close
AICO Cat 6 UTP 23AWG Network Cable Black 2meter
AICO Cat 6 UTP 23AWG Network Cable Black 2meter
Close
AICO Cat 6 UTP 23AWG Network Cable Black 3meter
AICO Cat 6 UTP 23AWG Network Cable Black 3meter
Close
AICO Cat 6 UTP 23AWG Network Cable Black 5meter
AICO Cat 6 UTP 23AWG Network Cable Black 5meter
Close
Aidalarm LAB35107 Aidalarm Pull Cord Instruction Label with Braille text
Aidalarm LAB35107 Aidalarm Pull Cord Instruction Label with Braille text. The label gives instructions for the use of our Aidalarm disabled toilet alarms in both text and Braille. The same label as provided with our A600LKITB and A600LKITM kits.
Close
Aidalarm S1708A Aidalarm Press to Reset Button with Braille text
Aidalarm S1708A Aidalarm Press to Reset Button with Braille text. A wall mounting Press to Reset button with Braille text plus 2 high brightness yellow LEDs and sounder for caller reassurance. Enclosed in white ABS plastic, complete with a single gang surface mounting box. Flush fitting is also possible with a standard single gang back box. This is a non-latching unit with N.O. contacts specifically designed for use with our Aidalarm Disabled Toilet Alarm systems. The LEDs and sounder have separate terminals. The LED and sounder current limit resistor is provided for 12 vdc operation. The button contacts are rated at 50ma 24vdc resistive, N.O. press to close.
They should NOT be used for switch feeds to door strikes or mag locks etc.
Close
Aidalarm A600B Aidalarm Disabled toilet alarm controller – battery powered
Aidalarm A600B Aidalarm Disabled toilet alarm controller - battery powered. Aidalarm A600B battery powered controller meets the requirements for emergency signalling systems for disabled persons and is fully compliant with BS8300 and the requirements of the Disability Discrimination Act. The A600B is ideal for installation by any competent handyman and does not cause any installation conflicts with the Part P Building Regulations.
This unit is compatable with Hoyles Call Equipment Range. The unit requires either a S1600-R or S1600AL-R ceiling mounted RED pull cord, (optional) Dado panic strip RPD01000 or wall mounted call button S1705PY. Additionally, a S1708A reset button must be fitted to enable the system to be reset at or near the point of calling. An S1778A overdoor light /sounder can be added to give warning in the immediate area.
Close
Aidalarm A600L Aidalarm Disabled toilet alarm controller – mains powered
Aidalarm A600L Aidalarm Disabled toilet alarm controller - mains powered. Aidalarm meets the requirements for emergency signalling systems for disabled persons and is fully compliant with BS8300 and the requirements of the Disability Discrimination Act.
The A600L is a 240VAC mains powered controller, this unit can also be powered by 12vdc requiring a minimum of 250mA.
This unit is compatable with Hoyles Call Equipment Range. The unit requires either a S1600-R or S1600AL-R ceiling mounted RED pull cord, (optional) Dado panic strip RPD01000 or wall mounted call button S1705PY. Additionally, a S1708A reset button must be fitted to enable the system to be reset at or near the point of calling. An S1778A overdoor light /sounder can be added to give warning in the immediate area.
Close
Aidalarm A600lkitb Aidalarm Battery Powered Disabled Toilet Alarm Kit
Aidalarm A600lkitb Aidalarm Battery Powered Disabled Toilet Alarm Kit. This battery powered kit meets the requirements for emergency signalling systems for disabled persons and is fully compliant with BS8300 and the Disability Discrimination Act. Everything is provided in the kit (except cable and fixings) to deliver an effective, fully compliant, simple to install and simple to use system.
Could also be used as a emergency assistance alarm in changing rooms, interview rooms, reception areas etc.