Close
Elmdene STX2405-C 24V DC 5A Power Supply Unit
Elmdene STX2405-C 24V DC 5A Power Supply Unit. The new STX range of switch mode power supplies has been specifically designed for EN54 compliant fire systems. Available in either 1A, 2A, 5A or 10A versions they are certified to EN54-4:1997, A1:2002 and A2:2006.
The units include intelligent battery charging using Elmdene's efficient EcoCharge technology, possess mains and battery monitoring with independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.
Close
Fanvil PA2 SIP Video Intercom and Paging Gateway
Fanvil PA2 SIP Video Intercom and Paging Gateway.Fanvil PA2 brings the stability and audio quality of Fanvil VoIP phones to your paging system. A SIP-enabled gateway for paging and video, PA2 supports two SIP lines for voice broadcast over your IP network. It has a configurable audio output up to 30W.Fanvil PA2 not only supports HD voice quality.
Close
Fanvil IW-SA30 IP Speaker Wall Mounted
Fanvil IW-SA30 IP Speaker Wall Mounted.The Speake is Compatible with standard SIP (RFC3261) protocol and main IPPBX/IMS platform. All-in-one wall-mounted design, integrated with network audio codec, digital amplifier amplifier and speaker. Noise Reduction - The embedded processing module reduces environmental noise and improves voice recognition up to 5 meters (approx. 16 feet).
Close
Fanvil i31s Video Door Phone
Fanvil i31s Video Door Phone.High reliability Video Door phone, Supports two video streamsOne for NVR recording or monitoring while one for SIP Video Call.All-in-one IP Doorphone: Support Remote DTMF, Local Password and RFID Cards to Open the Door.communication protocol "SIP", Operator platform IMS, Flexible ways to open the door , Support Fiber, reduce wire arrangement.
Close
Fanvil i30 Video Door Phone
Fanvil i30 Vidoe Door Phone.The design of i30 IP Video Door phone is based on experience and knowledge of Fanvil VoIP phone development. Stream transmission uses standard IP / RTP protocol and video transmission adopts RTSP. I30 have a variety of enterprise-level features and it is compatible with lots of major platforms, such as 3CX, Asterisk, Broadsoft, Elastix, etc.The i30 IP Video door phone is designed for operation in indoor conditions. The robust mechanical construction offers protective coverage rating against dust and water (IP65).
Close
Fanvil i23S Sip Audio Door Phone
Fanvil i23 SIP Door Phone houses the latest technology and incorporates 10+ years of development and next generation product design. It is enterprise level hardware that uses the IP/RTP/RTSP protocol for voice transmission. It features HD voice and an intelligent security system. The i23 will keep your guests and employees safe, while offering excellent tools for entry control and monitoring.The video access controller does not require additional wiring and the i23 supports fiber.
Close
Fanvil i20S IP Audio Door Phone
Fanvil i20S IP Audio Door Phone.The design of IP Door phone are based on experience and knowledge of Fanvil IP phone development.i20S are using standard IP/RTP/RTSP protocol for voice transmission and enjoy the advantages of full range of compatibility.i20S have a variety of enterprise-level features and compatible with lots of major platforms, such as 3CX, Asterisk, Broadsoft, Elastix, etc.
Close
Fanvil i18S SIP Video Intercom
Fanvil i18S SIP Video Intercom the product that give us the easy to access which means we can access it without any worry and make our activity better than before. This video intercom have a lot of fiture like the camera with the HD Video quality, the sounds has an HD Voice, noise reduction, intelligent security system and multi protection that the privacy can keep it with a strict security.
Close
Fanvil i12 SIP Audio Intercom
Fanvil i12 SIP Audio Intercom - PoE (i12-N-01P) Overview The Fanvil i12 intercom is designed for a wide range of applications. The i12 combines IP technology with an industrial intercom and can be easily configured and managed. The i12 Series SIP Intercom can be easily configured in various application scenarios such as: banks, schools, apartments, etc. Features 2 SIP Lines PoE Enabled (Power over Ethernet) Full-duplex Speakerphone Intelligent DSS Keys (Speed Dial) Wall-mount Installation Special Integrated Noise Reduction Module Omnidirectional Voice Pickup 2 Embedded Short-circuit Input Interfaces 2 Embedded Short-circuit Output Interfaces Supports 4 Controlled Events:
Close
Elmdene VRS123500-EB 12V 3.5A Power Supply Unit
Elmdene VRS123500-EB 12V 3.5A Power Supply Unit. 3 PA Button Double Push is a 12V, 3.5A encapsulated power supply and is part of Elmdene's established Vision a range of power supplies designed specifically for CCTV applications. The unit features a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication.It also has a high-efficiency switch mode operation which means lower running temperature and lower running costs.
Close
Elmdene ELM-PA-G3-SS Stainless Steel Grade 3 PA Button Double Push
Elmdene ELM-PA-G3-SS Stainless Steel Grade 3 PA Button Double Push. The Elmdene range of panic buttons has been ergonomically designed and are ideal for use in commercial and domestic intruder installations. All units are double push and are provided with integral resistors for use with most control panels. There is also the option for double pole connection if required. Spare terminals allow through connection for multiple units wired to one zone.
Close
Elmdene VRS121000EB 12V DC Encapsulated Power Supply Unit
Elmdene's Vision 12V dc encapsulated power supplies have been designed specifically for CCTV applications. The range comprises of 1A, 2A, 3.5A, and 5A models. The units feature a universal mains input voltage range from 100 to 240V ac and include electronic short circuit protection and mains status indication (3.5A and 5A models only).They also use high-efficiency Elmdene VRS121000EB 12V DC Encapsulated Power Supply Unit. switch mode operation which means lower running temperature and lower running costs. The units have a neat and compact design and come fitted with either the UK or Euro mains plug.
Close
Elmdene VRS122000EB 12V 2Amp Power Supply Unit
Elmdene's Vision 12V dc encapsulated power supplies have been designed specifically for CCTV applications. The range Elmdene VRS122000EB 12V 2Amp Power Supply Unit. Elmdene VRS122000EB 12V 2Amp Power Supply Unit. comprises of 1A, Elmdene VRS122000EB 12V 2Amp Power Supply Unit 2A, 3.5A and 5A models. The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication (3.5A and 5A models only). They also use high efficiency switch mode operation which means lower running temperature and lower running costs.
Close
Elmdene VRS128000-8-T 12V DC Low Profile CCTV PSU
Elmdene VRS128000-8-T 12V DC Low Profile CCTV PSU. Elmdene's popular 12V dc CCTV range of power supplies consists of both low-profile and IP68 variants. The units are available in either 4A or 8A power ratings with options of up to 16 individually fused output circuits. Individually fused outputs can provide isolation of selected circuits when servicing or in the event, one circuit fails, allowing the rest of the system to operate normally, maintaining system integrity.Elmdene products using switch mode technology are typically 80-87% efficient. This can save your customers money by reducing their power bills and carbon footprint.
Close
Elmdene STX2402-C 24V EN54-4 Power Supplies for Fire Systems
Elmdene STX2402-C 24V EN54-4 Power Supplies for Fire Systems. The new STX range of switch mode power supplies has been specifically designed for EN54 compliant fire systems. Available in either 1A, 2A, 5A or 10A versions they are certified to EN54-4:1997, A1:2002 and A2:2006.
The units include intelligent battery charging using Elmdene's efficient EcoCharge technology, possess mains and battery monitoring with independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.
Close
Elmdene STX2401-T 24V EN54-4 Power Supply Unit
Elmdene STX2401-T 24V EN54-4 Power Supply Unit. The new STX range of switch mode power supplies has been specifically designed for EN54 compliant fire systems. Available in either 1A, 2A, 5A or 10A versions they are certified to EN54-4:1997, A1:2002 and A2:2006.The units include intelligent battery charging using Elmdene's efficient EcoCharge technology, possess mains and battery monitoring with independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.
Close
Elmdene STX2401-C 24V EN54-4 Power Supply Unit
Elmdene STX2401-C 24V EN54-4 Power Supply Unit. The new STX range of switch mode power supplies has been specifically designed for EN54 compliant fire systems. Available in either 1A, 2A, 5A or 10A versions they are certified to EN54-4:1997, A1:2002 and A2:2006.The units include intelligent battery charging using Elmdene's efficient EcoCharge technology, possess mains and battery monitoring with independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.
Close
Elmdene G2405BM-C 24V DC G Range BM Series Switch Mode Power Supply
Elmdene G2405BM-C 24V DC G Range BM Series Switch Mode Power Supply. High-efficiency cost-effective power supply ideal for use in Fire, Access Control and General Security applications. Featuring a regulated 27.6Vdc output supplying continuous full rated current to load plus additional current for charging 2 x 12V standby batteries. Maximum battery life is assured using deep discharge protection to prevent premature battery failure when operating in standby mode for extended periods.
Close
Elmdene G2401BM-C 24V DC G Range BM Series Power Supply Unit
Elmdene G2401BM-C 24V DC G Range BM Series Power Supply Unit. The new 24V G Range BM Series power supplies have been designed for access control, CCTV, fire systems (where compliance with EN54-4 is not required) and general purpose applications. The products use energy efficient switch-mode technology and have a universal mains supply input (90-264V ac). Elmdene's FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.Elmdene products using switch mode technology are typically 80-87% efficient.
Close
Elmdene G2405N-C 24V DC G Range N Series Power Supply Unit
Elmdene G2405N-C 24V DC G Range N Series Power Supply Unit. The 24V dc G Range, N Series power supplies have been designed for access control, fire systems (where compliance with EN54-4 is not required) and general purpose applications. The products use energy efficient switch-mode technology and have a universal mains supply input (90-264V ac). Elmdene's FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.Elmdene products using switch mode technology are typically 80-87% efficient.